ProtoSound Features and Settings

ProtoSound Features and Settings
ProtoSound Train

ProtoSound 1 Common Settings

ProtoSound mth

Effect Feature/Reset Clanks/Clinks Activation Notes
Factory Reset 18 3 / 3 Bell (Single non-garbled) Some very early PS1 engines cannot be reset.
Motor/Chuff Volume 6 1 / 1 Whistle Button (100%,50%,25%,0%) Interrupt power to lock in selection
ProtoCoupler On/Off 10 2 / 0 Whistle Button (1 Bell = On, 2 Bells = Off) Interrupt power to lock in selection
Cab Chatter On/Off 23 4 / 3 Whistle Button (1 Bell = On, 2 Bells = Off) Interrupt power to lock in selection
Whistle/Horn in Neutral 25 5 / 0 Whistle Button (1 Bell = Off, 2 Bells = On) Interrupt power to lock in selection
PFA 28 5 / 3 Whistle Button (1 Bell = On, 2 Bells = Off) Interrupt power to lock in selection
Direction Lock Enable 40 8 / 0 Whistle Button (1 Bell = Off, 2 Bells = On) Interrup power to lock in selection There are additional instructions for locking a loco in a certain direction. See operator’s manual or MTH website for operator’s manual.
Squealing Brakes 45 9 / 0 Whistle Button (1 Bell = On Demand (PFA), 2 Bells = Always On, 3 Bells = Off) Interrupt power to lock in selection



ProtoSound 2 Common Settings
Effect Activation Confirmation Notes
Reset 1 WST/HRN 5 BELL 2 blasts from the Horn/Whistle Press buttons in a very consistant sequence
Factory Reset
Must use DCS remote to complete
Direction Lock Enable 1 WST/HRN 3 BELL 2 blasts from the Horn/Whistle Press buttons in a very consistant sequence
Speed Control 1 WST/HRN 2 BELL 2 blasts from the Horn/Whistle Press buttons in a very consistant sequence
Announcements 1 BELL 2 WST/HRN Announcements will begin Press buttons in a very consistant sequence
Rear Coupler 1 BELL 3 WST/HRN Coupler fires Press buttons in a very consistant sequence
Front Coupler 1 BELL 4 WST/HRN Coupler fires Press buttons in a very consistant sequence